XK DPV

Suex XK DPV Scooter: Durable, high-performance DPV for the most demanding professionals. XK is the DPV for technical/professional use: it enables long-range and cave exploration thanks to its Li-ION battery that offers 330 minutes at cruising speed and 100 minutes at maximum speed (100 m/min). Depths of up to 200 metres can be reached with XK.

SINAPSI NOSE FOR SUEX DPV

Sinapsi Nose forSuex DPV: SINAPSI is a special nose for navigation that replaces the standard nose. It is equipped with sophisticated electronics to receive and process underwater navigation data acquired via DPV. The SINAPSI project has required years of increasingly sophisticated research, including many tests and trials to optimise the system using the most exciting, up-to-date technological solutions.

COMFORT TECHNICAL HARNESS

Technical harness for back plate mounting with all necessary components included and fully adjustable. Mounting and dismounting the back plate is very versatile, as it is fixed with screws of the twin cylinders themselves

ERON D-1 FOR SUEX DPV

Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)

BASIC COMPLETE HARNESS + KNIVE

Complete set contains of: PA harness with grommet, pocket with knife, crotch strap with 1 integrated D-ring and belt stopper, 1x stainless-steel D-ring, 3x stainless-steel D-ring bend, 6x stainless-steel stoppers, stainless-steel buckle, 5 narrow and 1 wide bungees

COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

copy of COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

BASIC HARNESS

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

ELITE 2 HARNESS

Tech/Rec is at its best with the Elite 2 Harness. The Elite 2 Harness System offers you all the features of a technical harness with the added comfort that recreational divers look for.

SOLO HARNESS

Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!

BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

ACCESSORIES POCKET BLACK

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

XTREM KANGAROO SMALL HANDBAG

The TDS Xtrem Kangaroo pocket is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed to the smallest detail to offer maximum performance to the technical diver.

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

ARMADILLO BACK PAD

Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg

ADITIONAL POCKET

Additional pocket for backplate ballast system or belt. Dimensions 18x15x4 cm

BACK PLATE POCKET

Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.

POCKET W/ CARABINERS & CUT SYSTEM

Small if not necessary, big when has to be. Big Cordura 1000multi-compartments pocket to fasten to Side Mount back, thanks two double ended stainless steel snap links. Made to keep a low profile when empty, the pocket is furnished with scissors.

BACKPLATE WEIGHT POCKET 4.5 KG (Pair)

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

WEIGHT POCKET FOR BACK PLATE (Pair)

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate (pair of bolts and nuts included). Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights.